Bell helmets are manufactured by the sports company Bell Sports Inc., which is a very popular brand in terms of making the most reliable and technically profound helmets for the racers to provide maximum protection and hence, getting the best for the rider. Bell Sports Inc. was established in 1954 under the guidance of Roy Ritcher. Since then, the company has always strived to deliver their best products in head protection.
The review of this Bell Pro Star helmet will show you that spending an amount of $1199 on this racing helmet is not a bad idea, after all. Read on all about this helmet to clear your doubts before buying it.
Benefits
This helmet is specifically designed for the competitive racers. It will provide the driver with maximum visibility while driving.
The aerodynamic design and ergonomics used in it are developed by using modern wind tunnel testing and learning from the real-life experiences of the riders on the track.
You can stay relaxed while driving at a very high speed, as the helmet will keep you protected as well as comfortable at the same time.
It comes in five different sizes so that you can find your fit easily.
You can get this helmet for just $1199 which is a great deal, considering all the benefits.
The shell of this helmet is way lighter than any helmet that its competitors are manufacturing due to the usage of material that goes into the making of the shell.
We have worked closely with RevZilla, Amazon and 2Wheel over the years to provide our testers with products to review. They are all great partners and unique in their own ways, so make sure to check out their prices. Please don’t forget we may get a commission if you buy from them.
RevZillaBuy AmazonBuy 2WheelBuyFeatures
This helmet has a special three-layer liner which provides you with maximum protection against all kinds of impacts, be it low or high. The liner is flexible which will adjust itself to the impact being experienced.
Maximized viewing with the Panovision viewport.
You can wear this helmet for an upright position suitable for a street view profile, or while sports touring.
It meets the certification of the Department of Transportation (DOT).
The cheek pads in the helmet are magnetic which allow you to remove them and clean them.
Before reaching you, it has been approved by various professional racers. So, you can invest your valuable $1199 in this helmet without any worries.
Shell Design and Quality
The shell is the latest TeXtreme carbon shell which is almost 20% lighter than the other carbon or polycarbonate shells. The ergo dynamics and the aerodynamics used in the shell equally spread the impacts to the various part of the head to prevent any injuries.
The liner used is flexible and uses a three-layer technology. Each layer plays its role depending upon the intensity of the impact. For instance, when the intensity is low, it will use the first layer, and when the intensity of the impact is high, it uses the deeper layers.
The liner used is moisture-wicking, so it will keep your head cool and sweat-free.
It may be the lightest full-face helmet, but it is definitely not any less in strength. It is durable as well as strong and will never ditch you.
Interior
Interiors of this Bell Pro Star helmet are very impressive. It uses 6 EPS foam layer and the inner liner of the shell. The technologies used in the interiors are just amazing.
A three-layer flex impact liner provides the best protection against impacts, in which all the three layers are made up of three different materials.
The cheek pads of the helmets are magnetic which means they can be quickly released, cleaned, and then again attached for protection to the cheek areas.
We have worked closely with RevZilla, Amazon and 2Wheel over the years to provide our testers with products to review. They are all great partners and unique in their own ways, so make sure to check out their prices. Please don’t forget we may get a commission if you buy from them.
RevZillaBuy AmazonBuy 2WheelBuyVentilation
The helmet is uniquely infused with technologies that will keep the air flowing which will keep you cool and comfortable throughout the riding. The fabric used in the liner is the recycled jade from Virus which maximizes the smooth air flow, resulting in lowering the temperature inside the helmet up to 10 degrees to keep you dry even in the most scorching sun.
The fabric is ultra moisture-wicking which absorbs the sweat and dries up quickly.
Visor
It has used a Panovision viewport to facilitate maximum visibility to the rider, no matter at what speed he is going, or wherever he is riding.
Most of the accidents take place due to unsafe lane change. With this viewport, you will be able to see better and change the lanes safely.
Safety
This Bell Pro Star helmet is approved by Snell M2015 and DOT. You should rest assured of the quality of the helmet. The amount you pay for this helmet is worth every dime.
Visibility is one of the most important safety factors while you hit the road. It is very important that you see all the objects clearly. The Panovision viewport used in this helmet allows you the maximum visibility anytime, anywhere.
Other Factors for Consideration
The advanced technologies used in this helmet include the Bell’s modern wind tunnel used in the aerodynamics of the shell.
Another point worth considering is the weight of the helmet. The teXtreme carbon used in the shell is 20% lighter than the carbon fiber, which takes away an extra 2-3 ounces away from your head; that way, it does not strain your neck muscles.
Verdict
You have to keep in mind that this Bell Pro Star helmet is designed keeping in mind the needs of a racer, as the improvements in the technology used in this helmet were developed on the feedback given by the racers on the track. If you are looking for a helmet suited for sports touring, you will need an extra 1 cm size for your helmet.