Larry Houghton of Lamb Engineering (2011 AMD World Championship runner up), who won the top International prize at the 2015...
JoinedFebruary 16, 2023
Articles1,521
For this Indian build labeled: Track Chief The RSD crew started with a dragbike rendering from Holographic Hammer, which inspired...
The bike is a 1981 XS650 the Engine is black with polished rocker covers and shaved fins, The frame is stretch 5 1/2 inches with a voodoo vintage Hardtail, custom 16 inch rear wheel 21 inch front wheel powder coated black with red nipples & stainless steel spokes, Black front...
Built In: U.S.A. Bike Style: Chopper JD was made in house by Jim’s Chopper Fab this one off custom frame...
This bike was built for the Discovery Channel’s “Biker Build Off” which first aired in June 2004. A huge motor,...
This cool black cherry painf job custom bobber from Hot Chop Speedshop in Japan uses a solid strut on a swingarm frame to convert it to a rigid. The bike features a super cool custom seat/rear fender setup with elements of cafe racer. They have sold this bike then bought...
Some of the chops from the crew at Thailand shop Fuck Stock look like they would be right at home...
This 59 Panhead was crafted by Kiyo of Kiyo’s Garage in Gardena CA. It has gone under the knife to...
In the words of Duane Ballard: After selling the Pink Taco bike, I knew I wanted to build another bike; I just wasn’t sure what to start with. My buddy Alex found a 1981 KZ1000 police bike next to a shop in Elsinore, California, and said the guy would take...
Unfortunately the Mooncricket flathead chop by builder Scott Craig has been completely parted out as of 2008 yet this bike...
One of the first things you notice about Icarus are the jugs and custom heads. According to the tech sheet...
In builder Lock Baker’s words: it’s called Knucklegame because it is a “game” to tune a motor like this; very challenging but also potentially rewarding if won! I made custom intake runners and welded them into the heads, then blended the insides, and capped them off with a pair of...
Awards: People’s Choice Award at European Bike Week 2012 (Faaker-See, Austria, September 2012) Design: GOC Construction: GOC Construction time: 12...
At the 2014 Intermot Motorcycle Show the Retro Modified Class was won by Nimbus 4 built by Tomáš Turner of...
It’s obvious that the drilled out I-beam frame and front end isn’t factory and didn’t come from any catalog. These were shop built. That rear fender however looks familiar. Built In: U.S.A.Bike Style: Samuri Image Gallery Evo Indian Bike Specifications – Gas Axe Chop Shop FEATURE SPECS Class Styling Samuri Frame Custom...
Molly-k, built by PsyclooZ of Japan is a 90cc bike based on a the mighty Honda super cub 90 C90....
The name: El Chano is Spanish for Milkfish but the meaning may be more like: slow and gradual. This custom...
37 years ago cyclic specification, New Year specification, slick tires, straight pipe, and now, Chirihama specification, Iboibo tire, straight pipe, 9/27, SAND FLATS to exit SPEEDWAY, and the family to move to Bonn family specification of the car, I wonder no edge to eagle Built In: Japan Bike Style: Drag...
In the words of Tim Dixon owner of Gas Axe ….. This bike was our entry to the 2012 Artistry...
Not too sure if the Dirty Sanchez build came before or after the Dirty Britt build at George Stinman’s Chaos...
The prism style gas tank of Deth Mettle is comprised of 10 panels hand welded into place to give it that look. Normally most of the edges on a prism tank are bent on a sheet metal brake. But that tank isn’t the only labor intensive but very unique feature...
The latest bike out of Paul Cox Industries is called the Guillotine presumably for the fact that it almost looks...
Harley Davidson made Panhead motors starting in 1948 and until 1965. I’m guessing that the funkadelic auqamarine paint job on...
When Craig stripped off the old tank and saw the lines of the frame he decided to make a tank to accentuate those lines. The second most striking piece of custom sheet metal is the front fairing that Craig says he almost gave up on. Well thankfully he didn’t because...
Instead of building a new bike Kirk Taylor of Custom Design Studios tracked down a buld he had called Suicide...
ZZ CHOP is a builder of custom bikes and parts and also quite a blogger about all things custom. He...
This Model K dragster is built by Nice motorcycles of Japan. The Harley Davidson Model K and KK were built in 1952–1953. The 750 cc side-valve engines, used the same bore and stroke of the earlier 45 W model and the predecessor of the Sportster Ironhead. The mascot of this...
The Greasy Little Fucker is the personal bike of Jason Parker Race Cars owner and namesake: Jason Parker. The bike...
When Carl Bjorklund of Super Rat originally took on this project in February of 2013 the goal was to turn...
The first bike created by the boys at DariztDesign Built In: Indonesia Bike Style: Bobber Image Gallery Preamble Bike Specifications – Darizt Design FEATURE SPECS Class Styling Bobber Gastank Custom One Off Gastank Handlebars / Risers MX / Tracker Bars Intake Cover Custom One Off Motor Brand...
Hogtech builds their own brand of Swedish chopper starting with their own frames made in house and a proprietary engine...
While this is the second Lucifer bike from Covingtons Customs, (this time with two carbs) the really cool part about...
Coco was fabricated by George Stinsman of Chaos Cycles. By fabricated we mean: the tank was assembled from cold rolled sheet metal. The frame started out as 1.75 pipes, the handlebars, fender, and exhaust were also all fab’ed in house using imagination and blood, sweat and more blood. Ride is...
This bike was built in Poway, California for a customer in Scotland. Starting with a used Thruxton, we swapped the...
So how do you follow up a bike that was as loved and hated as After Hours bikes first Hater?...
Model 33 looks to me to be boardtracker influenced but according to George the idea was to give the bike the feel of something you found in your grandfather’s shed under a tarp. It is powered by a stock 74 inch rebuild with split rockerboxes. Those nostalgic looking tanks and...
Ramble On was built in 2013 by Chaos Cycles on a Kraftech frame. The engine is a 103 cubic inch...
Probably the longest (wheelbase) creation that will ever roll out the door of the Chaos shop this this uber Long...
As with most of the Chaos bikes Donkey Punch comes with a long list of one off hand fabricated parts that were all done in the Chaos shop: both oil and gas tanks, the rear fender, the springer frontend, the curved ape bars, the exhaust etc. The 96 cubic inch...
This custom bobber is based on a 1981 shovel-head and features an open primary with suicide shift lever. The owner...